Jan 20, 2020 Viewed: 328 Tag: aluminum extrusion  

Aluminum profile inspection platform

The aluminum profile inspection platform (also known as aluminum profile plate) is similar to the general cast iron platform, but there are also differences. The difference lies in the structure of the platform. If the general platform is not very heavy, the panel and enclosure can be made. It is a bit thinner, which can save costs, but the aluminum profile inspection platform cannot be measured this way. Although the load bearing of the platform is not very large, but due to its special shape, the height of the platform should be kept at 300 or more. The thickness of the panel It is advisable to keep it at 50, so that the platform can maintain better accuracy and facilitate the use of customers. Therefore, customers must not listen to people's side when choosing a platform, and do not delay production just to save a little money.

The aluminum profile inspection platform is a platform for examining the parallelism of aluminum profiles, and is an essential production tool for aluminum profile manufacturers.

The special inspection platform for aluminum profiles produced by our company is suitable for the inspection of aluminum profiles of various specifications, with high accuracy, good internal stress elimination, and no deformation during long-term use. At present, our company has provided multiple aluminum profile inspection platforms for many manufacturers producing aluminum profiles nationwide. Aluminum profile is widely used in aviation, aerospace, construction and other industries. Aluminum profile itself is relatively long. Because of the characteristics of aluminum profile, the inspection platform has the following characteristics:

1. The upper surface is flat, and the flatness of the upper surface is manually scraped.

2. Specifications: 500 * 6000, 600 * 6000 (Special specifications are made according to the drawings of the purchaser.)

3. Accuracy: Performed according to national standard measurement and verification procedures, which are four levels of 0, 1, 2, and 3, respectively.

4. Material: The high-strength cast iron HT200-300 has a working surface hardness of HB170-240. After two manual treatments (artificial annealing 600-700 degrees and natural aging 2-3 years), the accuracy of the product is stable and the wear resistance is good. .

Aluminum profiles and cast iron slabs are sometimes used in conjunction with the assembly line. Inevitably, they will be impacted. The supporting rack must be stable and the surface thickness of the platform must be strengthened.

More blogs