Blog For Aixi Rapid

Aixi Rapid's blog aims to share our hard earned knowledge on manufacturing and product development.

Mar 25, 2020

Do you know why gears fail ?

Do you know why gears failDo you often encounter gear failure during the use of gears? If so, do you know why? Today we will take a look at several possible causes of gear failure.First of all, if it is an imported gear, then from the perspective of ...
Read More
Mar 25, 2020

What are the advantages and disadvantages of various gears

What are the advantages and disadvantages of various gearsSpiral bevel gear, straight bevel gear, helical bevel gear, their differences, occasions, performance, advantages and disadvantages comparison1. Straight bevel gear is the most basic type of b ...
Read More
Mar 25, 2020

Selection of gear reference

Selection of gear referenceThe selection of gear machining standards often varies depending on the structure and shape of the gear. Gears with shafts are mainly positioned with apex holes; for hollow shafts, after drilling the center inner hole, they ...
Read More
Mar 24, 2020

Relationship between tooth profile and modulus of gear

Relationship between tooth profile and modulus of gearThe “modulus” refers to the ratio of the tooth pitch t between the tooth profiles on the same side of two adjacent wheels to the circumference ratio π (m = t / π), in millimeters. Modulus is one o ...
Read More
Mar 24, 2020

Common gear materials and their mechanical properties

Common gear materials and their mechanical propertiesGear teeth must transmit torque and bear loads such as bending and impact during transmission. After a period of use, the gear teeth will also experience tooth surface wear, tooth surface pitting, ...
Read More
Mar 23, 2020

Four conditions for optimal plastic mold temperature control

In the first part, the heating and cooling channels are in the mold.The second part is coolant.The third part is the temperature control part.In order to achieve the best temperature control of plastic molds, these three parts must meet the following ...
Read More
Mar 23, 2020

Causes and solutions of color and gloss defects in injection molded products

Analysis of the Causes of Color and Gloss Defects of Injection Molded Products Under normal circumstances, the gloss on the surface of injection molded parts is mainly determined by the type of plastic, colorant and the smoothness of the mold surface ...
Read More
Mar 22, 2020

Classification and explanation of extrusion process in injection mold

If you want to know the optimal design of the injection mold, you must know the type and assembly method of the extrusion mold. Injection mold components generally include molds, mold pads, and mold supports or mold frames that hold them. (When extru ...
Read More
Mar 22, 2020

What impact will the number of injection mold trials have?

1. The design of the injection mold did not go through a full collective review. The structure of the injection mold was unreasonable, which caused the injection mold to undergo multiple improvements after the test, which caused the injection mold co ...
Read More
Mar 20, 2020

What are the main aspects of cooling water leakage in injection molds?

Cooling water leakage of injection molds often occurs for many reasons, mainly in the following aspects:① It occurs mostly at the joints of the mold cooling water pipe. If leakage is found, the sealing tape should be wound around the thread of the pi ...
Read More
Learn more
CONTACT
US