Die Casting Material

3. 铸造用材料 Die Casting Material
3.1. 金属原材料 metallic raw material
金属原材料 metallic raw material
生铁 pig iron
铁合金 ferro-alloy
回炉料 foundry returns
中间合金 master alloy
3.2. 燃料 fuel
铸造焦炭 foundry coke
冶金焦炭 metallurgical coke
固定碳 fixed carbon
3.3. 熔剂 flux
熔剂 flux
除气熔剂(除气剂) degassing flux
覆盖熔剂(覆盖剂) covering flux
精炼熔剂(精炼剂) refining flux
耐火度(耐火性) refractoriness
耐火砖 firebrick
耐火粘土 fireclay
硅砖 silica brick
镁砂 grain magnesite
3.4. 造型材料 molding material
造型材料 molding material
砂 sand
水洗砂 washed-out sand
硅砂 silica sand
天然砂 natural sand
人工砂 artificial sand
天然粘土砂 naturally clay-bonded sand
橄榄石砂 olivine sand
铬铁矿砂 chromite sand
锆砂 zircon sand
炭粒砂 carbon sand
精硅砂 sharp sand
红砂 red sand
熟料砂 chamotte sand
粘结剂 binder
粘土 clay
无机粘结剂 inorganic binder
有机粘结剂 organic binder
高岭土 kaolin
膨润土 bentonite
钠基膨润土 sodium bentonite
钙基膨润土 calcium bentonite
活化膨润土 activated bentonite
干性油 drying oil
硬粘结剂(冷硬粘结剂) no bake binder
热固树脂粘结剂 thermosetting resin binder
油类粘结剂 oil based binder
水玻璃粘结剂 water glass binder, sodium silicate binder
纸浆废液 lignin liquor
合脂粘结剂 synthetic fat binder
水玻璃模数 sodium silicate modulus
3.5. 辅助材料 Auxiliary materials
附加物 additives
发热剂 exothermic mixture
分型剂(脱模剂) parting agent,stripping agent
固化剂(硬化剂)hardener
悬浮剂suspending agent
涂料 coating
型砂制备(砂处理) sand preparation
混砂 sand mulling, sand mixing
型砂(造型混合料) molding sand
芯砂(造芯混合料) core sand
合成砂 synthetic sand
自硬砂 self-hardening sand
水玻璃砂 sodium silicate-bonded sand
覆膜砂 precoated sand
烂砂泥(麻泥) loam
调匀砂 temper sand
面砂 facing sand
背砂(填充砂) backing sand
单一砂 unit sand
含泥量 clay content
含水量 moisture content
旧砂 floor sand
枯砂(焦砂) burnt sand
废砂 waste sand
热砂 hot sand
松砂 aeration , sand-cutting
筛分(筛析) screen analysis
旧砂处理 sand reconditioning
旧砂再生 sand reclamation
沉降分选 elutriation, decantation
型砂性能及试验
型砂试验 sand testing
透气性 permeability
流动性 flowability
型砂强度 sand strength
湿强度 green strength
干强度 dry strength
耐用性(复用性) durability
砂型(芯)硬度 mold hardness
热变形 hot deformation
残留强度 retained strength
热强度 hot strength
韧性 toughness
发气率(发气速度) gas evolution rate
发气性(发气量) gas evolution
吸湿性 moisture absorption
落砂性 knock-out capability
潰散性 collapsibility
胶质价 colloid index
破碎指数 shatter index
热气流烘砂装置 hot pneumatic tube drier
混砂机 sand muller, sand mixer
松砂机 aerator, sand cutter
冷却提升机 cooling elevator, coolevator
筛砂机 riddle
磁力滚筒 magnetic separator
旧砂再生设备 sand reclamation
气力输送装置 pneumatic tube conveyor
4. 铸造合金 Casting alloy
4.1. 铸铁 cast iron
铸铁 cast iron
铸铁石墨形态 morphology of graphite in cast iron
灰铸铁(灰口铸铁) gray cast iron
白口铸铁 white cast iron
麻口铸铁 mottled cast iron
共晶度 degree of saturation
碳当量 carbon equivalent
初生石墨 primary graphite
孕育铸铁 inoculated cast iron
球墨铸铁 spheroidal graphite cast iron, nodular graphiteiron, ductile iron
球状石墨 spheroidal graphite, nodular graphite
可锻铸铁 malleable cast iron
黑心可锻铸铁 black heart malleable cast iron
珠光体可锻铸铁 pearlitic malleable cast iron
铁素体可锻铸铁 ferritic malleable cast iron
白心可锻铸铁 white heart malleable cast iron
团絮石墨 tempered graphite
冷硬铸铁(激冷铸铁) chilled iron
耐磨铸铁 wear resisting cast iron
耐热铸铁 heat resisting cast iron
耐酸铸铁 acid resisting cast iron
高硅铸铁 high silicon cast iron
蠕墨铸铁 vermicular cast iron,compacted graphite cast iron
蠕虫状石墨 vermicular graphite
合金铸铁 alloy cast iron
4.2. 铸钢 cast steel
铸钢 cast steel
炭素铸钢 carbon cast iron
低合金铸钢 low alloy cast steel
高锰钢 high manganese steel
铁素体钢 ferritic steel
铸造非铁合金
青铜 bronze
铅青铜 lead bronze
铝青铜 aluminum bronze
黄铜 brass
铝铜合金 aluminum-copper alloy
铝镁合金 aluminum-magnesium alloy
铝硅合金 aluminum-silicon alloy
镁合金 magnesium alloy
轴承合金(减摩合金) bearing metal, antifrictional metal
巴氏合金 babbitt alloy
钛合金 titanium alloy